Package: libsnmp-info-perl Priority: optional Section: perl Installed-Size: 1827 Maintainer: Debian Perl Group Architecture: all Version: 3.17-1 Depends: perl, libsnmp-perl Filename: unstable/libsnmp-info-perl_3.17-1_all.deb Size: 677088 MD5sum: 1e6585aad463c43d5df78cefbcf6f513 SHA1: 83a70d142251accebcb4be499690948a6f0b5b53 SHA256: e18cbbff0239ff43947c941096bcdc886860787eb6247f79fa37f7e8b8d5e747 Description: OO Interface to Network devices and MIBs through SNMP SNMP::Info gives an object oriented interface to information obtained through SNMP. . SNMP::Info is geared towards network devices. Subclasses exist for a number of network devices and common MIBs. . The idea behind this module is to give a common interface to data from network devices, leaving the device-specific hacks behind the scenes in subclasses. . In the SYNOPSIS example we fetch the name of all the ports on the device and the duplex setting for that port with two methods -- interfaces() and i_duplex(). . The information may be coming from any number of MIB files and is very vendor specific. SNMP::Info provides you a common method for all supported devices. . This description was automagically extracted from the module by dh-make-perl. Homepage: http://search.cpan.org/dist/SNMP-Info/ Package: libapache2-authcookie-perl Priority: optional Section: perl Installed-Size: 200 Maintainer: Debian Perl Group Architecture: all Version: 3.18-1 Depends: perl, libapache2-mod-perl2 (>= 1.35) Filename: unstable/libapache2-authcookie-perl_3.18-1_all.deb Size: 52820 MD5sum: d4f85ba5a0265bd0dd28cd8c0f174d36 SHA1: 7c17c6c0dc0d096bf04c1a2342913251426ac139 SHA256: f529ec1720bc37a4a03c71a1a8bff5c3c85e45fb5e2e3d9faf599fc8169eb7ec Description: Perl Authentication and Authorization via cookies Apache::AuthCookie is for mod_perl version 2. If you are running mod_perl version 1, you should be using Apache::AuthCookie instead. . Apache2::AuthCookie allows you to intercept a user's first unauthenticated access to a protected document. The user will be presented with a custom form where they can enter authentication credentials. The credentials are posted to the server where AuthCookie verifies them and returns a session key. . The session key is returned to the user's browser as a cookie. As a cookie, the browser will pass the session key on every subsequent accesses. AuthCookie will verify the session key and re-authenticate the user. Homepage: http://search.cpan.org/dist/Apache-AuthCookie/ Package: libnet-iptrie-perl Priority: optional Section: perl Installed-Size: 80 Maintainer: Debian Perl Group Architecture: all Version: 0.7-1 Depends: perl, libnetaddr-ip-perl, perl (>= 5.11.3) | libscalar-list-utils-perl Filename: unstable/libnet-iptrie-perl_0.7-1_all.deb Size: 15174 MD5sum: 3b6c35af5295364f8bd70812835e459a SHA1: c4c4866e13562f5d6a52327f21c08420dfd7087d SHA256: 6deb7978cd527a2f05ae4bef7686284638989972eed4b9d801f14e82b8546640 Description: Perl module for building IPv4 and IPv6 address space hierarchies Net::IPTrie uses a radix tree (or trie) to quickly build the hierarchy of a given address space (both IPv4 and IPv6). This allows the user to perform fast subnet or routing lookups. It is implemented exclusively in Perl. Homepage: http://search.cpan.org/dist/Net-IPTrie/ Package: libbind-config-parser-perl Priority: optional Section: perl Installed-Size: 68 Maintainer: Debian Perl Group Architecture: all Version: 0.01-1 Depends: perl, libparse-recdescent-perl Filename: unstable/libbind-config-parser-perl_0.01-1_all.deb Size: 7148 MD5sum: a0e55477b6e7eb1ff70c55b22e61406b SHA1: 472cb79b9092fa27259ab5ecf78b92c4010784c0 SHA256: aca4271647f90528e5ef6c0e55c293ac8dbf5c9b9e69cef0e42bb73e3113d9ce Description: Parse BIND Config file. BIND::Config::Parser provides a lightweight parser to the configuration file syntax of BIND v8 and v9 using a Parse::RecDescent grammar. . It is in a similar vein to BIND::Conf_Parser. However, as it has no knowledge of the directives, it doesn't need to be kept updated as new directives are added, it simply knows how to carve up a BIND configuration file into logical chunks. Homepage: http://search.cpan.org/dist/BIND-Config-Parser/ Package: liblog-dispatch-config-perl Priority: optional Section: perl Installed-Size: 96 Maintainer: Debian Perl Group Architecture: all Version: 1.04-1 Depends: perl, libappconfig-perl, libio-stringy-perl, liblog-dispatch-perl Filename: unstable/liblog-dispatch-config-perl_1.04-1_all.deb Size: 18606 MD5sum: 359a857d5fb6e38115b41ae64cd9075e SHA1: 09cdb6bc8d715988f160dc38949f86cdcbcdb484 SHA256: 3bf13c29217f6ff8149ca2eb747e941b22fc6750c4a406d61f19c8bc3020051c Description: Log4j for Perl Log::Dispatch::Config is a subclass of Log::Dispatch and provides a way to configure Log::Dispatch object with configulation file (default, in AppConfig format). In other words, this is log4j for Perl, not with all API compatibility though. Homepage: http://search.cpan.org/dist/Log-Dispatch-Config/ Package: libnet-appliance-session-perl Priority: optional Section: perl Installed-Size: 124 Maintainer: Debian Perl Group Architecture: all Version: 3.113610-1 Depends: perl, libmoose-perl, libnet-cli-interact-perl Filename: unstable/libnet-appliance-session-perl_3.113610-1_all.deb Size: 25556 MD5sum: 8652508276ba40626dfb811c4dd73e37 SHA1: 1693d0e159db0c2b55848c1d16513ec82582ca22 SHA256: ecc28d22fd47646a178e83a3bf773fb3c2cdded27b906b8ff8cc5854698a247e Description: module for running command-line sessions to network appliances Use Net::Appliance::Session to establish an interactive command-line session with a network appliance. There is special support for moving into "privileged" mode and "configure" mode, along with the ability to send commands to the connected device and retrieve returned output. . Built-in commands come from a phrasebook which supports many network device vendors (Cisco, HP, etc) or you can install a new phrasebook. Most phases of the connection are configurable for different device behaviours. Homepage: http://search.cpan.org/dist/Net-Appliance-Session/ Package: libnet-patricia-perl Priority: optional Section: perl Installed-Size: 117 Maintainer: Debian Perl Group Architecture: i386 Version: 1.22-1 Depends: perl (>= 5.14.2-6ubuntu2.4), perlapi-5.14.2, libc6 (>= 2.4) Filename: unstable/libnet-patricia-perl_1.22-1_i386.deb Size: 28832 MD5sum: b2a77f0c8ca757c10dc37459839127f9 SHA1: 0a48df2fb9aa3bb48bc247efd41742116bf1034a SHA256: b665c4c6ad6c7348b05a5c34cce3846afe737dcae65ec23e60825fc437f688aa Description: unknown Net::Patricia uses a Patricia Trie data structure to quickly perform IP address prefix matching for applications such as IP subnet, network or routing table lookups. The data structure is based on a radix tree using a radix of two, so sometimes you see patricia implementations called "radix" as well. The term "Trie" is derived from the word "retrieval" but is pronounced like "try". Patricia stands for "Practical Algorithm to Retrieve Information Coded as Alphanumeric", and was first suggested for routing table lookups by Van Jacobsen. Patricia Trie performance characteristics are well-known as it has been employed for routing table lookups within the BSD kernel since the 4.3 Reno release. . The BSD radix code is thoroughly described in "TCP/IP Illustrated, Volume 2" by Wright and Stevens and in the paper ``A Tree-Based Packet Routing Table for Berkeley Unix'' by Keith Sklower. . This description was automagically extracted from the module by dh-make-perl. Homepage: http://search.cpan.org/dist/Net-Patricia/ Package: libnet-cli-interact-perl Priority: optional Section: perl Installed-Size: 420 Maintainer: Debian Perl Group Architecture: all Version: 1.120042-1 Depends: perl, libio-pty-perl, libipc-run-perl, liblog-dispatch-config-perl, liblog-dispatch-configurator-any-perl, libmoose-perl, libnet-telnet-perl, libpath-class-perl Filename: unstable/libnet-cli-interact-perl_1.120042-1_all.deb Size: 92562 MD5sum: 91b1a4e34059f3dc85fede4ea27a6425 SHA1: 47d3e6b35eebafd1ebcbc59361ba97c0e6cdae91 SHA256: 34864e256ad51814bc37797102a22cc4c06385b55b0b76d1d5c7a0968e7e1b54 Description: toolkit for CLI Automation Automating command line interface (CLI) interactions is not a new idea, but can be tricky to implement. Net::CLI::Interact aims to provide a simple and manageable interface to CLI interactions, supporting: SSH, Telnet and serial-Line connections, Unix and Windows support, and reuseable device command phrasebooks. Homepage: http://search.cpan.org/dist/Net-CLI-Interact/ Package: libapache2-sitecontrol-perl Priority: optional Section: perl Installed-Size: 212 Maintainer: Debian Perl Group Architecture: all Version: 1.05-1 Depends: perl, libapache-session-perl, libapache2-authcookie-perl, libapache2-request-perl, libcrypt-cast5-perl, libcrypt-cbc-perl Filename: unstable/libapache2-sitecontrol-perl_1.05-1_all.deb Size: 47264 MD5sum: 49060dc93d6b4ec666d63c519f59880a SHA1: b57942c126b23b5fa27e26c1d997e72c4d562ab0 SHA256: 9cbf76898f962b42660879e6e732340fa58d9fb956a821709d59974ee64451c9 Description: perl web site authentication/authorization system Apache2::SiteControl is a set of perl object-oriented classes that implement a fine-grained security control system for a web-based application. The intent is to provide a clear, easy-to-integrate system that does not require the policies to be written into your application components. It attempts to separate the concerns of how to show and manipulate data from the concerns of who is allowed to view and manipulate data and why. . For example, say your web application is written in HTML::Mason. Your individual "screens" are composed of Mason modules, and you would like to keep those as clean as possible, but decisions have to be made about what to allow as the component is processed. SiteControl attempts to make that as easy as possible. Homepage: http://search.cpan.org/dist/Apache2-SiteControl/ Package: netdisco-mibs-installer Priority: extra Section: contrib/net Installed-Size: 74 Maintainer: Oliver Gorwits Architecture: all Version: 1.7 Depends: perl, libwww-perl Suggests: netdisco-frontend, netdisco-backend Filename: unstable/netdisco-mibs-installer_1.7_all.deb Size: 12508 MD5sum: ded8c63f1833e9c265f8d6e4bdf3d7a6 SHA1: 18e9fcbcbdc5080d5f08735af3da5d1dd2651716 SHA256: 9f78ddd100fc2b223ee2e50df100c771be5d31caae3eeb2ee3dfa19d26d15417 Description: Netdisco MIB bundle installer package Netdisco is an Open Source web-based network management tool designed for moderate-large networks. Using SNMP it locates the switch port of an end-user system by IP or MAC address. Layer2 topology discovery via CDP. Device inventory by OS/model + more. . This package contains download and install helper programs for the NetDisco MIB bundle, which cannot be redistributed in Debian. Package: liblog-dispatch-configurator-any-perl Priority: optional Section: perl Installed-Size: 80 Maintainer: Debian Perl Group Architecture: all Version: 1.110690-1 Depends: perl, libconfig-any-perl (>= 0.15), liblog-dispatch-config-perl, liblog-dispatch-perl Filename: unstable/liblog-dispatch-configurator-any-perl_1.110690-1_all.deb Size: 9670 MD5sum: a377c603b0593f568ba90620bb68dd7a SHA1: 48bb25180bdac077d2dd4cb8f8e6f98684b672e4 SHA256: e1598f42a3d53afc1fde7d6083b130a5023e865fbbbb986ec99056cd80c4fb0a Description: configurator implementation with Config::Any Log::Dispatch::Config is a wrapper for Log::Dispatch and provides a way to configure Log::Dispatch objects with configuration files. Somewhat like a lite version of log4j and Log::Log4perl it allows multiple log destinations. The standard configuration file format for Log::Dispatch::Config is AppConfig. . Log::Dispatch::Configurator::Any plugs in to Log::Dispatch::Config and allows the use of other file formats, in fact any format supported by the Config::Any module. As a bonus you can also pass in a configuration data structure instead of a file name. Homepage: http://search.cpan.org/dist/Log-Dispatch-Configurator-Any/ Package: libnet-irr-perl Priority: optional Section: perl Installed-Size: 68 Maintainer: Debian Perl Group Architecture: all Version: 0.08-1 Depends: perl Filename: unstable/libnet-irr-perl_0.08-1_all.deb Size: 10736 MD5sum: b1aa322b8e99df7018ca8ffa754c3f08 SHA1: 712349b8582399f26bf22395094d41ee07f7d6ca SHA256: 1dd38b3968e50641249877e757ebd370f68200ce035e512d8c9d8c1f97c88c0f Description: perl interface to the Internet Route Registry daemon Net::IRR provides an object oriented perl interface to the Internet Route Registry. The interface uses the RIPE/RPSL Tool Query Language as defined in Appendix B of the IRRd User Guide. The guide can be found at http://www.irrd.net/, however an understanding of the query language is not required to use this module. . Net::IRR supports IRRd's multiple-command mode. Multiple-command mode is good for intensive queries since only one TCP connection needs to be made for multiple queries. The interface also allows for additional queries that aren't supported by standard UNIX whois utitilies. Homepage: http://search.cpan.org/dist/Net-IRR/ Package: libcrypt-cast5-perl Priority: optional Section: perl Installed-Size: 94 Maintainer: Debian Perl Group Architecture: i386 Version: 0.05-1 Depends: perl (>= 5.14.2-6ubuntu2.4), perlapi-5.14.2, libc6 (>= 2.4) Filename: unstable/libcrypt-cast5-perl_0.05-1_i386.deb Size: 25130 MD5sum: a8e2240c3dc930924367adcb8a5079f7 SHA1: aae2d96b97823bbb5fc3babe95a6732a0345b172 SHA256: cb41488b4c18c8e2c6330adb308147ebff5273bdbe510379be8655fe6097fd51 Description: unknown Crypt::CAST5 provides an implementation of the CAST5 block cipher using compiled C code for increased speed. CAST5 is also known as CAST-128. It is a product of the CAST design procedure developed by C. Adams and S. Tavares. . The CAST5 cipher is available royalty-free. . This description was automagically extracted from the module by dh-make-perl. Homepage: http://search.cpan.org/dist/Crypt-CAST5/